Three Qualifying Stages Of ADI
ADI Part 1 Test (The theory and hazard preparation test )
The theory test is made up of two parts; the multiple-choice part and the hazard perception part. The multiple-choice part is delivered using a touch screen computer and mouse and the hazard perception part records your responses through the use of a computer mouse button. You need to pass both parts to pass the theory test. If you pass one part and fail the other you will fail the whole test, and you will need to take both parts again.
For the hazard perception test, there are no separate versions for different vehicles, each vehicle category takes the same test, however, the pass mark is different for different categories of tests.
Before the test starts you will be given instructions on how the test works.
You can also choose to go through a practice session of the multiple-choice questions to get used to the layout of the test. At the end of the practice session, the real test will begin.
A question and four answer options will appear onscreen and you have to select the correct answer to the question by touching the screen or using the mouse. Some questions may require more than one answer. You can navigate between questions and ‘flag’ questions that you want to come back to later in the test. You will have 90 minutes to answer 100 questions that will be split into four bands which will be:
- road procedure
- traffic signs and signals,
- car control,
- pedestrians,
- mechanical knowledge
- driving test, disabilities, law
- publications, instructional techniques
The pass mark for the multiple-choice part of the theory test is 85% -that is 85 questions were answered correctly. After the multiple-choice part, you can choose to have a break of up to three minutes before the hazard perception part starts.
After the break, you will then be shown a short tutorial video clip about how the hazard perception part works.
The hazard perception part is also delivered on a computer but you respond by clicking a button on the mouse. You will be presented with a series of 14 video clips which feature everyday road scenes, in each clip, there will be at least one developing hazard, but one of the clips will feature two developing hazards. To achieve a high score you will need to respond to the developing hazard during the early part of its development. The maximum you can score on each hazard is five. You will not be able to review your answers to the hazard perception test; as on the road, you will only have one chance to respond to the developing hazard.
The pass mark for the hazard perception part of the theory test is 57 out of 75.
At the end of the hazard perception part of the theory test, you will be invited to answer several customer survey questions. You do not have to answer the questions if you do not want to, and any information given is anonymous and confidential. The survey questions do not affect the result of the test.
When you have finished the test you may leave the examination room. Once you have left the room, you will not be allowed to enter it again. You will then be given your result by the test centre staff. MQW helps you to pass the ADI part 1 test on the first attempt through MQW strategies-based tips for preparing for the test
ADI Part 2 Test (The theory and hazard preparation test)
On the ADI Part 2 exam, the examiner will mark your driving faults on the test report form ADI25. The system of marking is very similar to that for the L test, except that the assessment of faults is to a higher standard.
A relatively minor error is regarded as a driving fault, and is marked with an oblique stroke “/”. This type of error might be marked if you make a mistake in your driving technique (i.e. not checking you’re mirror), or if you react inappropriately to a traffic situation.
If you have a maximum of six driving faults and no serious or dangerous faults – during a drive of about 60 minutes – you will pass the ADI Part 2 exam. With seven or more driving faults or with any single serious or dangerous fault you will fail. In contrast, on the learner test, candidates are allowed a maximum of 15 driving faults and no serious or dangerous faults.
The manoeuvres for the ADI Part 2 exam are the same as those for the learner driving test. The only difference is that you’ll have to do 2 manoeuvres on the ADI Part 2 test and the Examiner will want to see a much higher standard of skill than required for a learner test.
The result is given to you at the end of the test.
You are limited to only 3 attempts on the ADI Part 2 exam. If you fail 3 times, you will have to wait two years from the date you passed the ADI part 1 exam before starting from the beginning again. You will then have to retake and pass Part 1 again.
A failed test can mean a lost fee as well as the probable loss of confidence and build of stress because of the limit on the number of attempts you can have.MQW helps you to pass on the first attempt so that you can save time and get better results from your efforts
Top ADI Part 2 Exam Tips
In your general driving as well as when you training for the ADI Part 2 exam always tries to drive the:
- With forwarding Planning
- Smoothly
- Briskly
- Efficiently
- Economically
- Courteously
- With the vehicle under full control at all times
ADI Part 2 Exam Day Tips
- First impressions: Make sure your car is clean inside and out. Be well-dressed and well-groomed. The appearance of you and your vehicle will make a greater impression than anything you say, and that is crucial. Remember-there is no second chance to make a first impression.
- Warm-Up: Arrange to have an hour’s driving session around the area of the test centre on the day of your test. This will help you to warm up and get into the swing of things. You will also be aware of any new roadwork, obstructions, etc, and will feel more able to deal with them more easily.
- Nerves: If you start feeling a shaky bag of nerves, breathe in, hold your breath, count up to 20, and breathe out. Repeat this exercise until you gain control of your nerves. Once the Part 2 exam starts, you’ll settle into your driving and your attention will be on the road rather than on your feelings, and your nervousness should disappear. The key to overcoming nerves is to stop perceiving the Part 2 exam as a threat.
- Don’t be afraid to ask: If you don’t understand the examiner’s instructions or directions, don’t be afraid to ask him or her to repeat the instruction.
- Think positive: Before you start a manoeuvre, repeat to yourself three times – silently – “this is a piece of cake.” Think positively at all times. You can do it!
- Making a mistake: If you feel you’re messing up on a reverse manoeuvre, just pull forward and start again. As long as you haven’t done anything serious or dangerous, such as touching the curb or failing to make effective observations, you will get a driving fault and you could still pass.
- Stalling: If, unfortunately, you stall, deal with it, and move on. As long as you don’t stall in a dangerous situation, such as on a roundabout and as long as you handle it properly, this needn’t count as a serious or dangerous fault and you could still pass your Part 2 exam.
- Don’t give up: If you feel you’ve made a mistake during the test, don’t instantly assume you’ve failed – it may only have been a driving fault and not a serious or dangerous fault. Put it behind you and carry on driving as well as you can.
- Keep your eyes on the road: Resist the temptation to look at the SE and how he is marking your test. You will not be able to deduce anything anyway. Keep your attention on your driving and the road ahead. Remember-“examiners don’t fail you, you fail yourself.”
ADI PART 3
The ADI Part 3 exam is to assess your ability to teach. The exam lasts 45 minutes and is divided into the Start middle and end phases. You need a Grade of A or B to pass the ADI Part 3 exam.
If you fail 3 attempts you start ADI Part 1, 2, and 3 again.
ADI Part 3 Exam Day Tips
Test Structure
- Duration: 45 minutes.
- Assessment:
- Ability to teach.
- Divided into start, middle, and end phases.
- Requires a grade of A or B to pass.
Tips
- Focus on 17 competencies listed in the marking sheet.
- Prepare a solid lesson plan.
